“The Remote Device Or Resource Won’t Accept The Connection” is an error that indicates that the computer or device trying to connect to the remote resource isn’t able to. This can be due to several reasons, but the most common one is that the network connection between the two devices is either not working or not allowed.

There are also many other reasons why a computer might not be able to connect to a remote device or resource. In some cases, the connection might fail because of incorrect network settings or hardware incompatibilities.

Other times, the remote device or resource might be down for maintenance or inaccessible due to security measures. 

When you run the Windows built-in Network Troubleshooter to fix any internet issues, you might see an error that says “the remote device or resource won’t accept the connection”.

This is because of a problem with the network setup. An error message cannot provide you with the solution you require for the error. So you’re likely to have to apply more than one standard solution to allow you to resolve the problem.

To resolve this issue, you need to follow the methods that I explain in this article. 

Method 1: Disable the Proxy Settings

If you are experiencing computer errors when trying to connect to a remote device, disabling your proxy settings may help. Most browsers will use a proxy server to connect to different websites by default. 

The problem with using a proxy server is that it can sometimes interfere with the connection between your computer and the remote device. If you are experiencing this problem, try disabling your proxy server and see if that helps.

If you don’t know how to disable proxy settings then follow these steps:

  • First of all, open the proxy setting by pressing Windows+S and then type “internet options” in the Search box.
  • After opening the Internet Options window, you have to click on the Connections tab.
  • After opening the Connections tab, you have to click on the “LAN settings” button at the bottom.
  • Clicking on the LAN settings button will open another small window in front of you from which you have to check the box “Use a proxy server for your LAN” option.
  • Finally, click on the OK button of this small window and apply it to the Internet Properties window. Click on the OK button to save this setting.

Method 2: Reset the Internet Explorer Settings

Internet Explorer is a widely used web browser. Unfortunately, it has been known to have some issues. One of those issues is the “Remote Device Won’t Accept the Connection” error. This error can occur when IE doesn’t have the proper permissions to access certain files on the remote computer.

You need to follow these steps to reset internet explorer and fix this issue:

  • Press the Windows+R buttons to open the Windows Run command.
  • Type the following command and press Enter.
  • After opening the Internet Properties window, click on the “Advanced” tab in the top line.
  • After going to the Advanced tab, scroll down and click on the Reset option at the bottom.
  • When you click Reset, a new window appears. Select the option to Delete personal settings and then press Reset.
  • As soon as you click Reset, your Internet Explorer settings will be reset, resulting in the loss of your bookmarks and add-ons. For this reason, it is a good idea to make a backup beforehand.
  • Finally, restart your computer and check whether this solution was able to resolve the issue of the connection. However, if this method cannot fix the problem, you can follow the next method.

Method 3: Reset Microsoft Edge

Microsoft Edge is a popular web browser used by millions of people every day. Unfortunately, Microsoft Edge can sometimes encounter problems. One of the most common issues with Microsoft Edge is the “Remote Device Won’t Accept the Connection” error.

This error typically arises when someone tries to connect to a remote device using Microsoft Edge and gets the following message: “The remote device cannot be connected to because it is not currently on the same network as your computer.”

When you face this type of issue, follow these steps to reset Microsoft Edge and fix this issue quickly:

  • First of all, open the Microsoft Edge Browser.
  • Then click on three dots at the right top corner.
  • As soon as you click on the three dots, a list of different options for the Microsoft Edge browser will open in front of you. From this list, you have to click on the setting option.
  • After going to Settings you will find a list on the left side for setting different things of this browser in front of you.
  • From this list, you have to click on the Reset settings option.
  • When you click on the Reset Settings option, you will see an option called “Restore settings to their default values.” By clicking on this option, you can fix the error “The Remote Device Won’t Accept the Connection” by restoring all the settings of Microsoft Edge.
  • After clicking on the “Restore settings to their default values” option, a popup will appear in front of you, asking you to restore the settings of your Microsoft Edge browser. All you have to do is click on the “Reset” button. It will restart your browser settings shortly.

Method 4: Reset Google Chrome

Chrome is a popular web browser that has been around since 2008. It is available on many platforms, including Windows, Mac, and Linux. Chrome is free and open-source software, so you can trust that it will be stable and reliable.

?One common issue with Chrome is that it can stop accepting connections from remote devices. This can happen if the computer or device on which Chrome is installed is not up to date or problems with the network connection. 

In these cases, you may see an error message called “Remote Device Won’t Accept the Connection.” This error usually means that Chrome needs to be reset in order for the connection to be restored.

If you are using Google Chrome then you also need to reset this browser to fix the “The remote device won’t accept the connection” error.

  • First of all launch Google Chrome and click on three dots at the top right corner of the browser.
  • After clicking on the three dots a list will open in front of you, from which you have to click on the Settings option.
  • The next step is to go to the browser settings and click on the Advanced option.
  • After clicking on the Advanced option some more options will open in front of you, but you have to click on the Reset and clean up option from the given list.
  • Here you can select the “Restore settings to their original defaults” option. This will restore all the settings of your browser and fix the desired issue of your system.
  • In the last step, a popup window will appear in front of you, from which you have to click on the “Reset settings” option.

Method 5: Disable the Windows Firewall

Windows Firewall is a built-in security feature in Windows that helps protect your computer from attacks from the internet. If Windows Firewall is turned on, it can block access to certain websites and protect your computer from viruses and other malware.

However, if you have problems connecting to a remote device or server, disabling Windows Firewall may help.

Follow these steps to disable Windows Firewall:

  • First, press Windows+S and type Windows Defender Firewall in the Search box.
  • After the Windows Defender Firewall window opens, you have to click on “Turn Windows Defender Firewall on or off.”
  • In the next window that opens, you have to click on the option “Turn Off Windows Defender Firewall.”
  • Click on the OK button to save this setting and restart your computer to fix this issue. 

Method 6: Update the Group Policies

A common issue plaguing Windows 10 users is that their remote devices won’t accept the connection. This error can be caused by a number of issues, but one of the most common is a misconfigured Group Policies setting.

You can fix this problem and connect your remote devices successfully by updating Group Policies.

Suppose you’re experiencing the “remote device won’t accept the connection” error when trying to connect to a remote computer. In that case, there’s a good chance that you need to update your Group Policy settings.

This issue is typically caused by incorrect or out-of-date Group Policy settings and can be remedied by following these steps:

  • Press Windows+S and then type “Command Prompt“. Open the Command Prompt as an Administrator.
  • When the Command Prompt window opens, type this command and press Enter.
gpupdate /force
  • After pressing the Enter key, wait for a while until the group policy is updated. You must restart your computer once the Group Policy has been updated.

Frequently Asked Questions

Will Disabling The Antivirus Application Software For Fixing The Remote Device Or Resource Won’t Accept The Connection Error Affect The System?

Many people might be tempted to disable their antivirus software in order to fix a remote device or resource. However, doing so may have consequences on the system.

Disabling the antivirus software might miss out on potential malware threats, which could ultimately affect the system’s security. 

You can temporarily switch off your antivirus software program or permanently switch off your antivirus program will not affect the efficiency of the PC, whereas disabling your antivirus software permanently from the game software can affect your efficiency laptop.

Therefore, you should turn off your antivirus software until your web browser is correctly captured and cleared the internet page you have encountered errors.

What is the Best Antivirus Application Software For Running a Malware Scan on your Computer?

The best one for you will depend on your needs when it comes to antivirus software. However, some general tips that are universally applicable include using software with a high detection rate and up-to-date definitions and incorporating a malware scanner into your regular security regimen. 

There are many different antivirus software applications available, and it can be challenging to decide which is the best one for you. Some popular options include McAfee, Norton, and AVG.

It is important to research different applications and find one that fits your needs and budget. When selecting an antivirus application, be sure to read the reviews to make sure it is a reputable program.

What Does the Remote Device or Resource Won’t Accept the Connection?

There are a few reasons why a remote device or resource might not accept a connection. One possibility is that the remote device is not turned on or is not connected to the network. Another possibility is that there is a firewall or other security measure in place that is blocking the connection.

What Does It Mean the Device or Resource is not Responding?

If a device or resource is not responding, it means that the device or resource is not available or accessible. This can be due to a number of reasons, such as a network issue, a hardware failure, or an application crash.

Final Thoughts

As anyone who has ever owned a computer knows, errors can pop up at the most inopportune times. While there are many ways to fix errors, some are more effective than others. The methods that I will share with you in this article are ones that I have used myself and have found to be effective.

While there are no guarantees that these methods will work for everyone, they are definitely worth a try. So, if you are looking for ways to fix this particular error, follow the above methods.

Tim Miller

Tim has always been obsessed with computers his whole life. After working for 25 years in the computer and electronics field, he now enjoys writing about computers to help others. Most of his time is spent in front of his computer or other technology to continue to learn more. He likes to try new things and keep up with the latest industry trends so he can share them with others.

Leave a Comment