Windows updates are a common thing these days and are now a part of the Windows life cycle because of the benefit of many users. In the same way, update errors are common for users of Windows.

For older versions of Windows, you can disable them with some simple tricks. In case you are having problems installing an update with the error 0x80080008 message, then that calls for you to run the Update Troubleshooter, get to restart BITS and then scan the hard drive, and find out if there are any errors.

Every Windows 10 user has gotten used to its update issues. These kinds of issues are what is seen as the downside of Windows 10. All of the pesky issues are closely followed by an identity code that makes sorting them out quite easy.

One of the most common errors that are repetitive is the one with the error 0x80080008. The error shows up when your update when some files have failed to down and install or when the update is stuck.

In this article, we will discuss the possible solutions for fixing the feature update in windows 10, Version 1903 – Error 0x80080008.

What are the Variations of Windows Update Error 0x80080008?

The update error 0x80080008 interferes and stops you from downloading and installing the latest updates.

Here are some of the most common issues that users have complained about:

  • Windows Update failed. This is simply a Windows Update error that will interfere with how the updates are working. However, you can solve this issue by manually downloading and updating it or disabling the antivirus software.
  • 0x80080008 Server 2016. Many people complained about this issue with Windows Server 2016. Though the majority of the solutions we are discussing are for Windows 10, they are also helpful when it comes to Windows servers as well.

Here are the solutions:

Solution 1: Disable Your Anti-Virus Software

Most users reported that the cause of the error 0x80080008 was due to issues relating to third-party anti-virus programs. If you have anti-virus software on your computer, you should try disabling it and confirm if the update will push through.

If that doesn’t help, you can go ahead and uninstall it. If you do this and the problem gets solved, you should switch to a different tool that doesn’t prompt that error to occur.

To uninstall the anti-virus program from your computer, you should do the following:

  • Press the Windows Start button.
  • Click on the Settings and then go to Apps.
  • On the Apps & features window, a list of all the apps on your computer will open up. You can search for the third-party anti-virus program installed on your computer and then select it.
  • Proceed and click Uninstall.

After you’ve successfully uninstalled it, try updating Windows 10 and confirm if the error shows up or not. If the issue was a result of the anti-virus software, then the error will automatically disappear.

Solution 2: Run the SFC Command

This is another method of solving the issue relating to error 0x80080008. There are times when the Windows 10 installation files may get corrupted or damaged because of a failure in the updates and result in the update error code 0x80080008.

To handle this issue, one can use the SFC tool. It will help you check out the integrity of your system files and come up with a solution to fix the error 0x80080008.

To do that, here is what you need to do:

  • On the Windows Search box, type cmd.
  • Right-click on the Command Prompt and then select Run as administrator.
  • The next thing you should do is type SFC /scannow in the Command Prompt window and press Enter.
  • What follows is the command forcing a scan of the entire system files repairing the faulty ones.

Once you are done checking all the files in your system through the SFC command, you can attempt to run the Windows Update Service and confirm the updates can be downloaded without the error popping up.

Solution 3: Execute the DISM

In case the method involving SFC scan is unable to solve the issue relating to Windows 10 Update error code 0x80080008, the next thing you should try out is the DISM.

Using the DISM tool, you can solve all issues relating to updates. Follow the steps highlighted below to run DISM and solve the error 0x80080008 in Windows 10.

  • The first thing you need to do is open the Command Prompt with Admin privilege. What you need to do is press the Windows + X key and then choose Command Prompt (Admin).
  • Once you get to the Command Prompt, you should type the following command:
DISM.exe /Online /Cleanup-image /Restorehealth
  • In case DISM is unable to find the files online, you should insert the installation DVD or USB. Go ahead and insert the bootable media and proceed by typing the following command:
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess

It is important to note that before you run the above command, you must replace the C:\RepairSource\Windows with the path of your USB or DVD.

The solution given above will assist you in overcoming a variety of errors in Windows 10.

Solution 4: Restart the BITS Service to Remove Update Error 0x80080008

BITS is an acronym for Background Intelligent Transfer Service. It is one of the critical services required for Windows Update. When the Windows Update Service stops working, then the Windows Update will display the error message and no progress will be made from that point.

What you need to do is restart the BITS and get rid of the update error code 0x80080008 from your Windows 10 computer.

Here is how you do that:

  • Press the Windows + R key to open up the dialogue box.
  • Once you’ve opened the run command, type services.msc and then press Enter.
  • Search for the BITS and then double click on it. That will open up its properties.
  • The next thing you need to do is verify that the BITS is operating in the right way. In case you find out that it is not working right, go ahead and click on the Start button.
  • Proceed to the recovery tab and ensure that the first failure and the second failure are set to the Restart service.
  • The final thing you need to do is confirm the selection and check if the updates are working just fine.

Once you have done that, you should try updating your system and confirm if it is working alright.

Solution 5: Re-Register Wups2.dll

Wups2.dll file can be described as a faulty module that will trigger this kind of error message. What you should do is try and register the file again and see if the issue gets resolved.

To do this, there are a few steps you need to follow:

  • To begin with, you should open a Command Prompt. You need to have Administrator rights to do so. After opening the Command Prompt, you should proceed and choose Run as administrator.
  • Proceed and type several commands under the command prompt section and then press Enter.
  • Once you are done running the commands given above, you should immediately restart your computer. After that, run the Windows Update Service and see if the issue persists.

Solution 6: Restart the Windows Update Components

Many users have confirmed that the components of windows update sometimes also cause the error 0x80080008. This issue can be resolved by restarting all the components of Windows Updates.

Here is how you do that:

  • Press the Windows + X key and select the Command Prompt (Admin).
  • Once you get to the Command Prompt section, type the following commands and then press Enter key after each command:
net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
ren C:WindowsSoftwareDistribution SoftwareDistribution.old
ren C:WindowsSystem32catroot2 Catroot2.old
net start wuauserv
net start cryptSvc
net start bits
net start msiserver

Once you are done executing these commands, the issue should be resolved and what follows is that your Windows 10 will update successfully.

Solution 7: Boot in Safe Boot Mode

There are times when the background programs may interfere with the update process and that will ultimately lead to a couple of errors. The only way to fix the error 0x80080008 is by disabling the startup programs and then proceed to boot it in safe mode.

  • The first thing you should do is press the Windows + R key.
  • When the Run window appears, type msconfig and then click OK.
  • Proceed and head to the Services tab section and check the Hide all Microsoft services box.
  • Click on the Disable all button and then select the Apply button.
  • The next thing you should do is head straight to the Startup tab.
  • Click on the Open task manager link.
  • You should choose startup programs one by one and then select the Disable button.

After doing all that, you should restart your computer and try downloading your updates. The issue should be resolved at this point.

Solution 8: Manually Download the Windows Update

Another effective way of fixing this issue is by downloading and installing all these updates manually from their website.

Here is how you go about it:

  • The first thing you should do is confirm the KB number of the update you specifically want to download.
  • The next thing you should do is visit the Microsoft update catalog website and then fill in the KB number.
  • After doing that, you will receive a list of results. From those results, look for the version of the update that is similar to your system architecture.
  • Press on the Download button.
  • Once you are done downloading the update, the issue should be resolved.

Solution 9: Do an In-Place Upgrade

Many users have confessed that performing an in-place upgrade is an ideal way of fixing the issue of error 0x80080008.

If you are not aware, an in-place upgrade will force your Windows 10 to put install the latest version while at the same time keeping all your files and applications in the right place.

To do this method here is what you should do:

  • The first thing you should do is download a Media Creation Tool and then go ahead and run it.
  • The next thing you should do is select and upgrade the computer and then select Next.
  • Be patient and wait as the setup prepares all the required files.
  • The next thing you should do is click on Download and then install the updates and then select Next.
  • Give it time to download all the updates.
  • Make sure you follow onscreen instructions until you get to the installation screen. After that, click through on what it says onscreen.
  • Choose the options that require you to keep all your files and all the apps and then select the Next option.
  • The next thing you should do is closely follow the onscreen instructions and select complete installation.  

Frequently Asked Questions

Is Windows 1903 Update Safe?

Even though Microsoft is continuing to bring out the updated version 1903 update slowly, you should be a little bit cautious. Make sure that you carefully monitor the release health dashboard to discover the kind of bugs that might be affecting your computer.

For business customers, you will have to wait to the point where Microsoft has declared ready for deployment all over the globe.

What is the Difference Between Windows Version 1903 and 1809?

Version 1903 contains all the features included in all the other earlier versions of Windows 10, including version 1809.

What you should know is that Windows 10 version 1903 applies only to OEMs for the makers of new computers. However, this new requirement does not affect already existing devices.

What Should You Do If You are Running Into Problems With Windows 10 1903?

In case you are encountering issues with installing the Windows 10 1903 update, try running the update troubleshooter. Then proceed and reset the Windows Updates. You can also try updating it manually. That should solve any issue you may be having.

How Long Does Windows 10 Version 1903 Take to Install?

The installation process of Windows 10 takes about half an hour. You should also note that the configuration and installation process may take longer. To sum it up to you the entire process may take up to an hour.


In case you are facing issues installing an update with the error 0x80080008, do not get too worried. Try any of the solutions discussed in this article and you’ll get the issue fixed.

Tim Miller

Tim has always been obsessed with computers his whole life. After working for 25 years in the computer and electronics field, he now enjoys writing about computers to help others. Most of his time is spent in front of his computer or other technology to continue to learn more. He likes to try new things and keep up with the latest industry trends so he can share them with others.

Leave a Comment